The distance from the ceiling to the lowest portion of the housing of the 42" Ceiling Fan for RVs # 324-000056 that you referenced is 4-7/8 inches.
I attached a picture that shows this dimension. view full answer...
There is one 12 volt ceiling fan in the range of 30 inches in diameter, the 34-1/2 inch diameter East Seventeen 12V RV Ceiling Fan # 344410TSDC36BNOKCY.
This fan looks great with a brushed nickel finish on the housing and blades that have a cherry finish on one side and oak on the other so you can get the exact aesthetic you are looking for. It is a 4-speed fan to give you absolute control over the air flow in your RV and comes with a wall switch.
I have added a link to a video review... view full answer...
From where the 42" Hugger Style RV Ceiling Fan with Light Kit for RVs # 277-000081 touches the ceiling to where the top of the blade sits on the bracket is about 5-1/8". I have attached a photo showing this dimension for you to reference. view full answer...
I went out to the warehouse and found that the lowest point of the East Seventeen Hugger Style RV Ceiling Fan # 344410TSDC36BNOKCY is going to hang down about 4-1/2" from the ceiling. I have attached a photo for you to check out. view full answer...
I went ahead and checked with the manufacturer and they tell me that when mounted, the 42" Hugger Ceiling Fan # 324-000047 will hang between 4-7/8" and 5" down from the ceiling (not including the length of the chain). view full answer...
The 12V RV Ceiling Fan with Wall Switch - 3 Speed - 42" Diameter - Brushed Nickel - Black/Oak # 324-000053 descends 4-7/8" from the ceiling. view full answer...
The 12V RV Ceiling Fan w/ Wall Switch - 4 Speed - 34-1/2" Diameter - Brushed Nickel - Cherry/Oak item # 344410TSDC36BNOKCY weighs 7 lbs. I have attached a review video below that goes over this fans functions. view full answer...
I measured the Replacement Blades for AirrForce 42" Hugger Style RV Ceiling Fan # 277-000398 for you and they are 16- 5/8 inches long with 4 inches wide at the bottom and 4-7/8 inches wide at the top. I've attached a photo to assist. view full answer...
The holes that mount to the motor for the Replacement Brushed Chrome Brackets for AirrForce RV Ceiling Fan with Light # 277-000399 do measure 1-1/2" on center just like what you have. I have attached a photo that has additional measurements that you can reference as well. view full answer...
The ceiling garnishes like the MaxxAir Maxxfan RV Roof Vent - White item # MA54FR you were looking at are universal. So long as you have the standard 14"x14" opening for your MaxxAir 4501k this garnish will be able to fit. It may require some trimming to match your ceiling depth. view full answer...
The Ventline RV Trailer Bath Fan Non-Lighted # VE64FR is approximately 3-5/8" in height so you would want at least 3-3/4" of space minimum to install this in your camper. view full answer...
When the lid of the Fan-Tastic roof vent part # FV802250 is closed it will add 4-1/2 inches to the height of your trailer. When open it would be 11-1/2 inches. view full answer...
Not a saint, but I should still be able to help you out! I believe you are asking about a standard square roof vent on your trailer, and you really just need to know two things - the size of the cut out of the vent opening and the (approximate) depth of the opening. Good news is, square trailer vents are almost always a standard 14-1/4" x 14-1/4" (give or take a smidge), so that's likely what you have, but you'll want to verify. If if is, you can use either a vent without a fan or a vent... view full answer...
I can see why the diagram might be confusing for the Ceiling Garnish - Fan-Tastic Vents Roof Vent - 6" Leg # FVK1060-80. This garnish is listed as being a fit for 14-1/4" x 14-1/4" RV roof vent openings, but the actual dimensions will be slightly different; in this case, the dimensions shown are for the interior dimensions of the garnish and the outer edges of the mounting flanges. The important measurement you'll want to confirm is the size of your roof opening, which should be between... view full answer...
The garnish of the Fan-Tastic roof vent you have part # FV802250 is 4-1/2 inches tall but we do offer taller garnishes like the part # FVK1060-81 which is 6 inches tall and can be cut down shorter as needed. view full answer...
I checked and the largest leg depth for a ceiling garnish is 6 inches, the Ceiling Garnish for Fan-Tastic Vents Roof Vent - 6" Leg - 14-1/4" x 14-1/4" - White # FVK1060-81. This garnish has the most depth of any garnish for any trailer roof vent available. view full answer...
The overall length of the Replacement Fan Blades for AirrForce 42" Hugger Style Ceiling Fan # 277-94444 that you referenced is 16-5/8 inches. view full answer...
The 42" Ceiling Fan # 324-000056 that you referenced has a shipping weight of 7 lbs. If you take away the packaging it will weigh about 5 lbs. view full answer...